Consolidated Products Customer Success Story:

RAILCAR FALL ARREST SYSTEMS

A customer in Wyoming reached out to Consolidated Products for a safe method of accessing liquid railcars for sampling and bottom unloading of liquid asphalt.

These railcars had varying sizes of crashboxes and overall length of railcars. The daily throughput of railcars required 10 unload cycles a day.

Careful review of equipment and scope requirements with customer allowed Consolidated Products to build a custom safety solution. Years later the customer is still satisfied with the fall protection system.

Does your facility have questions about leading edge fall safety or how to upgrade current fall protection systems?

OSHA 1910.28(a)(1)

This section requires employers to provide protection for each employee exposed to fall and falling object hazards. Unless stated otherwise, the employer must ensure that all fall protection and falling object protection required by this section meet the criteria in § 1910.29.

Engineered and Manufactured in the United States.

Designed to meet your facility needs and protect all of your employees operating in hazardous locations.

BARGE FALL ARREST SYSTEMS

  • Is your facility unloading barges or ships?

  • Do your operators have to access barges during the winter months?

  • Are they exposed to slippery surfaces on the hull of the barge?

  • Do you have time for a fall safety system site review?

Do you have a need for your fall safety system to moved around at your facility?

Are you leasing your current facility and unable to install a permanent overhead safety system?

Have the foundation costs exceeded the cost of the safety system?

Does your facility team members not have the manpower to install?

Will this fall safety system project need to incorporate installation?

PORTABLE FALL ARREST PRODUCTS

INSIDE PLANT FALL ARREST SYSTEMS

With OSHA changes in OSHA 1910 and OSHA 1926 new max operating heights without fall protection is 4’-0” above grade.

Does your facility have all fall hazards covered with handrail or fall protection system?

Consolidated Engineering provides onsite support to 3D Scan and capture field measurements exactly.

These measurements are relayed to our Consolidated Manufacturing who executes precisely based on these 3D Scan field measurements.

Aviation and Tooling Industry exposes operators to a variety of fall protection hazards during the manufacturing and maintenance processes.

Incorporating an overhead fall protection system is mission critical for providing an efficient and safe solution.

Foundation costs increase the project cost exponentially and the GT-Golden Triangle system can mount to existing overhead steel for support.

Consolidated Engineering will review applicable project information during web conferences and site visits.

AVIATION FALL ARREST SYSTEMS