3000 SERIES - SWIVEL JOINTS
STEEL MILL AND HEAVY INDUSTRIAL APPLICATIONS
CPI Service + OPW Swivels = Process Success
Consolidated Products has a wide variety of materials for swivels, that can be applied to customer specific product applications.
Sizing for the loading arms is dependent upon the inlet flange from the piping system or the required product flow rate.
In order to reach various connection points or loading areas, having the correct swivel makes all the difference.
Sizes: 3/4” to 12”
Standard Materials: Aluminum, Bronze, Carbon Steel, Ductile Iron, 316 Stainless Steel
Standard Seals: Buna-N, Fluorocarbon, PTFE, EPDM, Neoprene, Kalrez®
End Connections: FNPT, 150/300 ANSI Flanged Ends, Butt/Socket Welds
Metal Options
Aluminum (ASTM B26, A356 T6)
Bronze ( ASTM B62-83600)
Carbon Steel (ASTM A105)
Ductile Iron (ASTM A-536)
Stainless Steel (ASTM A351-CF3M/CF8M)
Seal Options
Buna
Fluorocarbon
PTFE
EPDM
Neoprene
Kalrez
Lubrication
Loading arm maintenance and repair is dependent upon the amount of lubrication provided to the swivels in the loading arm.
Everyone knows that lubrication is key to extending the life of a swivel joint.
Extensive research has been performed to determine the ideal lubricants and grease for our Swivel systems.
The standard lubrication is a High Performance Synthetic Lubricant (OPW part # 880-0089).
Specially formulated to reduce friction & wear.
Requires only annual lubrication
Will not drip, melt or carbonize
Complies with FDA regulation 21CFR178.3570
Temperature Range -40F – 750F (-40C – 399C)
Not for use with EPT/EPDM Seals. EPT/EPDM seals require the use of OPW 885-0083 lubricant.
